Vacuum pump is used for the production and storage of negative pressure for the vacuum plastic forming. Single pump or double pump is depend on you. Double pump can ensure the safety and stability of the system, and guarantee the air consumption while molding large products.

Technical parameters:
A. Water-cooled sliding-vane rotary vacuum pump is used, with pressure of over 0.9bar;
B. Control method: Automatic & manual;
C. Vacuum pressure tank: 3m3(single pump), 6m3(double pump);
D. Power for vacuum pump: 3-phase-4-wire 380V, 3KW/pump;
E. Power for cooling pump: 3-phase-4-wire 380V, 0.5KW

We are both the vacuum forming machines and acrylic/ABS bathtubs and shower trays manufacturer

The bathtub making line need the devices as follows,

1. Acrylic bathtub vacuum forming machine
2. Air and vacuum system:
Vacuum pump(making vacuum), vacuum tank(to storage the vacuum), air compressor(to make the high pressure air), air tank(to storage the air pressure)
3. Edge trimming machine(to cutting the bathtub and shower tray edges)
4. Resin and stone powder mixer
5. Fiber glass and resin spray gun(also can be done manually)
6. Bathtub designs and bathtub moulds

We are also the acrylic/ABS bathtubs and shower trays manufacturer, if you buy the bathtub making line from us, we will help you to set up the whole bathtub making line in your factory, or you can send your technicians to our bathtub making factory to learn all the bathtub making skills.

We are the professional manufacturer of vacuum forming machines, acrylic bathtub forming machine, vacuum forming moulds, bathtub trimming machines, acrylic bathtubs, shower trays, shower enclosures in Hangzhou China.

We can train you the acrylic bathtub making skills and machine operation skills in our factory.

Our product(machine) video:  i.youku.com/yeedshower

Our factory locates in Xiaoshan District, Hangzhou City, which is about 10 miniutes driving from the Hangzhou Airport.

Welcome to us for the visiting.

Here as follows is our contact details,